Tennant S10 Operator's Manual
  1. Manuals
  2. Brands
  3. Tennant Manuals
  4. Blower
  5. S10
  6. Operator's manual

Tennant S10 Operator's Manual

Hide thumbs Also See for S10:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Information Manual
S10
(Electric)
Sweeper
Operator Manual
331580
Rev. 03 (1-2010)
*331580*
www.tennantco.com
Home
Find... Go To..

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S10 and is the answer not in the manual?

Questions and answers

Related Manuals for Tennant S10

Summary of Contents for Tennant S10

  • Page 1 (Electric) Sweeper Operator Manual 331580 Rev. 03 (1-2010) *331580* www.tennantco.com Home Find... Go To..
  • Page 2 Minneapolis, MN 55440 Phone: (800) 553--8033 or (763) 513--2850 www.tennantco.com Thermo- -Sentry is a US registered and unregistered trademark of Tennant Company. Specifications and parts are subject to change without notice. Original instructions, Copyright E 2007, 2009, 2010 TENNANT, Printed in U.S.A.

  • Page 3: Table Of Contents

    WHEEL DRIVE CHAINS ... . STATIC DRAG CHAIN ....S10 331580 (11- -07) Home Find... Go To..

  • Page 4: Safety Precautions

    Before Working On Machine. WARNING: Heavy hopper. Do not - - Avoid Contact With Battery Acid. remove without help. Can cause back - - Use TENNANT Supplied Or Equivalent strain. Replacement Parts. This machine is not equipped with explosion 6. When loading/unloading machine proof motors.
  • Page 5 FOR SAFETY LABEL - - LOCATED LOCATED NEAR CHARGER. ON THE CONTROL PANEL. BACK STRAIN LABEL - - LOCATED ON THE TOP OF THE HOPPER. BATTERY CHARGING LABEL - - LOCATED ON THE LEFT SIDE PANEL. S10 331580 (7- -07) Home Find... Go To..

  • Page 6: Operation

    OPERATION OPERATION MACHINE COMPONENTS A. Filter Cover B. Left Access Cover C. Parking Brake Lever D. Hopper E. Side Brush F. Side Brush Arm G. Right Access Cover H. Instrument Panel S10 331580 (7- -07) Home Find... Go To..

  • Page 7: Symbol Definitions

    Filter Shaker Main Brush Free-Float Main Brush Down Main Brush Up Main Brush Adjust Circuit Breaker Circuit Breaker Hour Meter Battery Charge Indicator Electric Key Switch Key Switch Off Key Switch On S10 331580 (7- -07) Home Find... Go To..

  • Page 8: Controls And Instruments

    B. Filter Shaker Override Switch C. Battery Charge Indicator D. Main Brush Lever E. Hour Meter F. On-Off Key Switch G. Forward Propel Handle H. Reverse Propel Handle Circuit Breakers J. Charger Panel S10 331580 (7- -07) Home Find... Go To..

  • Page 9: Operation Of Controls

    The switch should be in the “off” position when servicing the machine. To move the machine backward, squeeze the reverse propel handle. To stop the machine, release the handle. S10 331580 (7- -07) Home Find... Go To..

  • Page 10: Battery Charge Indicator

    BATTERY CHARGER PANEL The battery charger panel shows the status of charging after the charger has been plugged into a wall outlet. S10 331580 (7- -07) Home Find... Go To..

  • Page 11: Hour Meter

    Main brush up position: Pull the lever up and lock the bottom notch of the lever into the Main Brush Up position. When parking the machine, always raise the brush to prevent the bristles from taking a set. S10 331580 (7- -07) Home Find... Go To..

  • Page 12: Side Brush Arm

    To release the parking brake, step on the lever and release it into the short notch on the right. When parking the machine, always raise the brush to prevent the brush bristles from taking a set. S10 331580 (7- -07) Home Find... Go To..

  • Page 13: Circuit Breakers And Fuses

    NOTE: The amount and type of soilage play an important role in determining the type of brushes to use. Contact a Tennant representative for specific recommendations. Nylon 6-Double Row Main Brush -- Recommended for general sweeping, and has good hopper loading.

  • Page 14: Machine Operation

    3. Move the main brush lever into the (Main Brush Down) or (Main Brush Free-Float) position. 4. Move the side brush arm into the down position. 5. Sweep as required. 6. Raise the main brush and side brush. S10 331580 (7- -07) Home Find... Go To..

  • Page 15: Emptying The Hopper

    FOR SAFETY: Before leaving or servicing machine; stop on level surface, set parking 9. Lower the filter cover. brake, and turn off machine. 4. Lift the filter cover. S10 331580 (NIL) Home Find... Go To..

  • Page 16: Removing The Hopper

    7. Close the filter cover. 5. Seek assistance to remove the hopper from the machine. Lift the hopper out of the machine. WARNING: Heavy hopper. Do not remove without help. Can cause back strain. S10 331580 (7- -07) Home Find... Go To..

  • Page 17: Machine Troubleshooting

    Charger not plugged into electrical Plug charger into electrical recep- receptacle tacle Charger cord not completely Replug charger cord into charger plugged into bottom of charger Charger cord is damaged Replace charger cord S10 331580 (7- -07) Home Find... Go To..

  • Page 18: Maintenance

    Check seals for damage and wear 25 Hours Battery cells Check electrolyte level Main brush Check floor pattern (after initial 25 hours only) Drive chains Check and adjust tension (after initial 25 hours only) S10 331580 (7- -07) Home Find... Go To..
  • Page 19 Check lubricant level LUBRICANT/FLUID DW -- Distilled water SPL -- Special lubricant, Lubriplate EMB grease, TENNANT Part No. 01433--1 SO -- Spray lubricant GL -- SAE 90 Weight gear lubricant NOTE: More frequent intervals may be required in extremely dusty conditions.

  • Page 20: Lubrication

    Lubricate the rear caster after every 50 hours of DIFFERENTIAL operation. Lubricate the differential (B) every 100 hours of operation. The differential grease fitting is located on the drive shaft inside the drive sheave. S10 331580 (7- -07) Home Find... Go To..

  • Page 21: Side Brush Gear Box

    0.25 in (6 mm) of the top. SELF ADJUSTING SHEAVE Lubricate the sheave shaft after every 100 hours of operation. Avoid getting oil on the belt or sheave surfaces. 03141 S10 331580 (4- -09) Home Find... Go To..

  • Page 22: Batteries

    Objects made of metal can potentially short circuit the batteries. Keep all metallic objects off the batteries. Replace any worn or damaged wires. Replace any defective batteries. To dispose of batteries, contact a battery dealer or your Tennant Service representative. S10 331580 (7- -07) Home...

  • Page 23: Charging Batteries

    30 minutes or more. Do not leave batteries discharged for lengthy periods. WARNING: Fire Or Explosion Hazard. Batteries emit hydrogen gas. Keep sparks and open flame away. Keep battery compartment open when charging. S10 331580 (1- -10) Home Find... Go To..
  • Page 24 Output current exceeds a limit. Disconnect charger cord, wait 30 seconds, times repeatedly then plug back in. If fault continues replace charger or contact TENNANT Service. 100% LED blinks Abnormal cycle. Safety timer ex- Battery maintenance required or replace while the 50% and ceeded the 18 hour charging time.

  • Page 25: Electric Motors

    A. Motor B. Clutch Plate C. Clutch Plate Bolt D. Bolt Slot E. Forward Belt Idler Sheave F. Reverse Propelling Belt G. Forward Propelling Belt H. Reverse Belt Idler Sheave I. Belt Guide S10 331580 (7- -07) Home Find... Go To..

  • Page 26: Side Brush Belt

    6. To adjust belt tension, loosen the button head screw through the side cover (not 11. Reinstall the access cover, and right side shown). cover, and bumper. S10 331580 (7- -07) Home Find... Go To..

  • Page 27: Main Brush Belts

    Check the main brush belts for wear after every 50 hours of operation. 06320 A. Vacuum Fan B. Stud Nut 4. Tighten all nuts and recheck belt tension. 5. Replace the rear panel. 03141 S10 331580 (7- -07) Home Find... Go To..

  • Page 28: Wheel Drive Chains

    NOTE: Do not force the main brush onto the drive hub. When the main brush slots and drive hub keys are properly aligned, the main brush will easily engage the drive hub. S10 331580 (11- -07) Home Find... Go To..

  • Page 29: Checking And Adjusting The Main Brush Pattern

    15 to 20 seconds. 5. Place the main brush lift handle in the (Main Brush Up) position. If any adjustments are made, recheck the main brush pattern before operating the machine. S10 331580 (7- -07) Home Find... Go To..

  • Page 30: Side Brush

    NOTE: It may be necessary to readjust the side brush drive belt tension after adjusting the side brush height. 03144 A. Side Brush B. Mounting Hardware 3. Slide the side brush (A) off the drive shaft. S10 331580 (7- -07) Home Find... Go To..

  • Page 31: Debris Hopper & Dust Filter

    The seal pressure should allow the hopper to float. Push the hopper down to check -- it should be able to go down and 03159 return to its original position. A. Hopper B. Hanger Bracket Bolts S10 331580 (7- -07) Home Find... Go To..

  • Page 32: Thermo-Sentry

    This may be done with the filter in the machine. Always wear eye protection when using compressed air. FOR SAFETY: When servicing machine, wear eye and ear protection when using pressurized air or water. S10 331580 (4- -09) Home Find... Go To..

  • Page 33: Skirts & Seals

    The rear brush skirts should clear the floor by 2 mm (0.06 in). Inspect the skirt for wear or damage and proper floor clearance daily. 02347 03157 S10 331580 (7- -07) Home Find... Go To..

  • Page 34: Propel Handle Assembly

    7. Reattach the ball joint to the propel handle assembly. 8. Start and test the machine. Squeeze both propel handles to ensure the machine moves in both directions. 9. Reinstall the rear cover and battery compartment covers. S10 331580 (7- -07) Home Find... Go To..

  • Page 35: Transporting And Storing The Machine

    03136 4. Secure the rear of the machine by wrapping straps around the stationary handle and fastening them to the truck or trailer. S10 331580 (11- -07) Home Find... Go To..

  • Page 36: Specifications

    Charger: Auto / Selectable AC Voltage Input 50/60 100--240 Type kW (hp) Electric Motor Propelling 0.75 (1) Type Quantity Volts Ah Rating Weight Batteries 155 @ 20 hr rate 38 kg (83 lb) S10 331580 (1- -10) Home Find... Go To..

  • Page 37: Tires

    Rear (1) Solid 130 mm x 38 mm (5 in x 1.5 in) MACHINE DIMENSIONS 1570 mm (62 in) 990 mm-- 1120 mm (39 in-- 44 in) 920 mm (36.25 in) 03131 S10 331580 (7- -07) Home Find... Go To..

  • Page 38: Index

    Electric Motors, 23 Check Electrolyte Level (Batteries), 20 Electrical system Check Specific Gravity (Batteries), 20 Batteries, 20 Checking and adjusting the hopper floor Charging the batteries, 21 clearance, 29 Emptying the hopper, 13 S10 331580 (11- -07) Home Find... Go To..
  • Page 39 Maintenance Chart, 16 Lubrication, 18 Meter, hour, 9 Brush arm pivots, 18 Motors, Electric motors, 23 Differential, 18 Drive chains, 18 Rear caster, 18 Self adjusting sheave, 19 Side brush gear box, 19 S10 331580 (11- -07) Home Find... Go To..
  • Page 40 Adjusting the side brush, 28 Installing the side brush, 28 Removing the side brush, 28 Side brush arm, 10 Side brush belt, Checking and adjusting the side brush belt tension , 24 S10 331580 (11- -07) Home Find... Go To..

Table of Contents