Table of Contents
Advertisement
a -
Fill/drain plug
GEARCASE LUBRICANT CAPACITY
Standard model gearcase: Approximately 200 ml (6.8 fl. oz.).
Bigfoot model gearcase: Approximately 260 ml (8.8 fl. oz.)
CHECKING LUBRICANT LEVEL AND REFILLING GEARCASE
1.
Place outboard in a vertical operating position.
2.
Remove vent plug and fill/drain plug.
3.
Remove fill screw and place lubricant tube into the fill hole.
4.
Add lubricant until it appears at the vent hole.
IMPORTANT: Replace sealing washers if damaged.
5.
Stop adding lubricant. Install the vent plug and sealing washer before removing the lubricant tube.
6.
Remove lubricant tube and reinstall cleaned fill/drain plug and sealing washer.
MAINTENANCE
a
b -
59
b
ob00597
Vent plug
ob00598
ob00599
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Outboard Motor and is the answer not in the manual?
Questions and answers