Presentation Mode Indication; Manual Trigger Control - Datalogic Gryphon I GFS4400 Product Reference Manual

Reading Parameters

Presentation Mode Indication

This operation is useful for indicating when the reader is in Automatic/Triggered Object Sense
Operating Mode. If enabled, the blue indicator will blink when Presentation Mode scanning is
active.
$CSMFL01(CR)
Presentation Mode Indication = Enable

Manual Trigger Control

This feature is used to enable/disable manual trigger when the reader is in Serial On Line
reading mode.
•
•
$CSOTM01
Manual Trigger Control = Enable
Product Reference Guide
DEFAULT
This feature is available in Serial On Line mode only.
Enable: allows a manual trigger push to start a reading phase.
Disable: (default) locks out the trigger button and does not allow manual triggering to
start a reading phase. When disabled, the trigger can still be activated once by pressing and
holding the trigger for 5 seconds to enter Debug Mode.
DEFAULT
Enter/Exit Programming Mode
$CSMFL00(CR)
Presentation Mode Indication = Disable
$CSOTM00
Manual Trigger Control = Disable
83