Related Manuals for Siemens 5TC1 series
Summary of Contents for Siemens 5TC1 series
- Page 1 DELTA miro Flush-Type-Radio 5TC1 … Operating and installation instructions 12/2008 251653.41.19 DS02...
-
Page 3: Table Of Contents
Contents General ..........2 Operation and functions ....12 1.1 Application ..........2 4.1 Radio mode (radio ON) ......12 1.2 Guarantee conditions ......3 Station memory ........13 1.3 Safety ............4 Setting the alarm ........14 4.2 Alarm mode ...........15 Description ........5 4.3 Idle state (radio OFF)......16 4.4 Activating the sleep timer ......17 2.1 Technical specifications ......5 Operating the sleep timer ......18 2.2 Layout and symbols ........6... -
Page 4: General
General 1.1 Application The radio is used for example in private rooms (bathroom, kitchen, bedroom) or as a fixture in a hotel room. All functions of the radio can be easily set by pressing buttons. Settings and current information are shown in the lit display (e.g. -
Page 5: Guarantee Conditions
These operating instructions are an integral part of both the device and our terms of warranty. They must be furnished to the user. The technical design of the appliance is subject to change without prior notification. SIEMENS products are manufactured and quality-checked with the latest technology according to applicable national and international regu- lations. -
Page 6: Safety
General 1.3 Safety This device is only intended to be used for its stated application. Unauthorised conversions or changes are forbidden! Disposal of the device must be done in compliance with the laws and standards of the country in which the device is operated! CAUTION! Danger of electrical shock! Current-carrying components are present inside the housing. -
Page 7: Description
Description 2.1 Technical specifications Reception frequency 87.5 – 108.0 MHz Power supply 230V~ / 50 Hz Own consumption 1.5 W (standby) Temperature range 0-50 °C Test specifications EN 55020, EN 55013, EN 60065 Marking Protection class IP 20 Dimensions in mm 161 x 90 x 45... -
Page 8: Layout And Symbols
Description 2.2 Layout and symbols Function Symbol Sleep timer Radio mode Alarm ON Alarm OFF Loudspeaker Display Alarm ON with alarm time 7:00 Setting the alarm Setup menu Setting the time Setting the contrast Setting the brightness 1 – Function buttons Reception setting 7 ON/OFF button Configuring the extension... -
Page 9: Extension Function
Description 2.3 Extension function The radio can be switched on and off by an extension. An extension can be a button, a switch or a motion detector. The extension is connected to terminal 1 at the back of the display unit. N 1 L Extension Function... -
Page 10: Troubleshooting
• C heck connection lines (only electrician). • I nstall the radio at a location where the radio reception is better (only electrician). Contact Telephone: ....+49 (0) 0180 50 50-222 Fax: ......+49 (0) 0180 50 50-223 Internet: ....www.siemens.de/delta Email: ...... support.automation@siemens.com Note: Before installation, check whether there is a good radio reception at the installation site! -
Page 11: Assembly And Installation
Assembly and installation 3.1 Step 1 The radio has to be mounted permanently (e.g. in a wall). It is suitable for vertical or horizontal installation because of the rotatable display unit. Two in-wall installation electrical outlets are needed with 60 mm Ø. Notes: –... -
Page 12: Step 2
Assembly and installation 3.2 Step 2 Notes: N 1 L – During the installation to the mains (230 V/50 Hz~) the electrical system has to be without voltage. – Secure the power line (230 V~/50 Hz) with a circuit breaker (max. 16 A). – Please note! Ensure phase balance of the 230 V~/50 Hz extension! • Attach the supply line to terminal L, N on the back of the display unit (1). -
Page 13: Step 3
Assembly and installation 3.3 Step 3 • Snap the frame with the loudspeaker cover into the base on the side. • Screw the frame to the base with the enclosed hexagon socket screw key (2 mm) (aligned with the loudspeaker cover). -
Page 14: Operation And Functions
Operation and functions 4.1 Radio mode (radio ON) The display shows the radio station‘s name (or the frequency) and the time. If the transmitter signal is weak, the display of the station‘s name (RDS signal) can be slightly delayed or fail to appear. Functions Displays Press ... -
Page 15: Station Memory
Operation and functions Station memory (in radio mode) To use this function the radio needs to be turned on (radio mode). Without any activity the radio switches into radio mode automatically after about 10 seconds. Radio mode Press briefly Press long Button ... -
Page 16: Setting The Alarm
Operation and functions Setting the alarm (in radio mode) To use this function the radio needs to be turned on (radio mode). Without any activity the radio switches into radio mode automatically after about 10 seconds. Radio mode Press a Setting the alarm Mode button Functions Displays... -
Page 17: Alarm Mode
Operation and functions 4.2 Alarm mode The alarm mode last 1 hour. If the snooze function is activated, the alarm mode is switched off for 10 minutes. After that the alarm mode is switched on again. Functions Displays Activate snooze function (10 Min.) , , SNOOZE ... -
Page 18: Idle State (Radio Off)
Operation and functions 4.3 Idle state (radio OFF) In idle state, a RDS channel search takes place for an automatic setting of the clock and summer/winter time. The updating of the time by RDS signal may take various minutes. When the RDS signal is low or the radio station lies in another time zone, set the clock manually (page 20). -
Page 19: Activating The Sleep Timer
Operation and functions 4.4 Activating the sleep timer (in idle state) To use this function the radio needs to be turned off (idle state). The radio is switched on for the duration of the sleep time. Without any activity the radio switches into idle state automatically after about 10 seconds. Idle state Press a Activating the sleep timer Button ... -
Page 20: Operating The Sleep Timer
Operation and functions Operating the sleep timer Functions Displays Press button briefly (about 1 sec.) a Activate memory (page 13) Press button longer (about 8 sec.) a Allocate memory (page 13) 104,7 30 min Search downwards for radio station 108.0 - 87.5 MHz 10:44 Search upwards for radio station... -
Page 21: Setup Menu
Setup menu 5.1 Activating the Setup menu (in idle state) To use this function the radio needs to be turned off (idle state). Without any activity the radio switches into idle state automatically after about 10 seconds. Idle state Press long (about 8 sec.) a Setup menu Mode button Functions Displays... -
Page 22: Setting The Time
Setup menu 5.2 Setting the time (setup menu) Setup menu Press a Setting the time Button Functions Displays Select hour or minute Set time back h/m – Set time forward Version 8:00 x.xx Press Mode button a Setup menu ... -
Page 23: Setting The Contrast
Setup menu 5.3 Setting the contrast (setup menu) Setup menu Press a Setting the contrast Button Functions Displays Contrast less 30-0 Contrast more 0-30 – Press Mode button a Setup menu Version x.xx Cancel ... -
Page 24: Brightness In Radio Mode
Setup menu 5.4 Brightness in radio mode (setup menu) Setup menu Press a Brightness in radio mode Button Functions Displays Display darker Display lighter – Press Mode button a Setup menu Version x.xx Cancel ... -
Page 25: Reception Setting
Setup menu 5.5 Reception setting (setup menu) Setup menu Press a Reception setting Button Functions Displays Sensitivity less (Reception of powerful stations) – Sensitivity more Version x.xx (Reception of weak stations) ... -
Page 26: Configuring The Extension
Setup menu 5.6 Configuring the extension (setup menu) Setup menu Press a Configuring the extension Button Functions Displays Switch function , ON OFF Button function , Push – Press Mode button a Setup menu Version ON OFF x.xx... - Page 28 Tel.: +49 (0) 0180 50 50-222 • Fax: +49 (0) 0180 50 50-223 e-mail: support.automation@siemens.com • Internet: www.siemens.de/delta...