Connect Setting; Account Setting; Proxy Setting; Stun Client - TCL V6201 User Manual

Table of Contents

Advertisement

2.5.1 Connect Setting

Operation:
Press
to select the Internet access method (static IP, DHCP, and PPPoE)
Press
to select a setting item.
Press numeric key and "." to fill in fields.
Press <BACK> to move to the previous menu.
NOTE: Any information for connection to Internet, please inquire the ISP.

2.5.2 Account setting

You must set user's basic information for SIP call. If the phone is subscribed to the SIP service
provider, the server information must be set up.
a. User Information
Set Display Name, User Name, Auth. ID, Password, SIP Address, all the items must have the
values given by the service provider when the phone is registered to the Internet phone service.
NOTE: If the IP Videophone is successfully registered to the Internet phone service, the Green
LED is on.
b. Advanced Setting
[Port]: SIP Server Port. The factory setting is 5060.
[Expires]: IP Videophone will automatically register to the server in every certain second. It is
about register setting. The factory setting is 3600.
NOTE: If the advanced setting is changed, the system will be rebooted.

2.5.3 Proxy Setting

Enable to set SIP proxy server address when press
to select "ON" for [Proxy ON/OFF].

2.5.4 STUN Client

This enables videophone to be easily configured to communicate with exterior IP-sharing router
through STUN function.
Enable to set the remote STUN server IP address and port when press
to select "ON" for
[STUN ON/OFF].
Keep Alive is only applied to NAT environment.

2.5.5 Network Status

In this menu, the current IP configuration of videophone is shown – IP address, Subnet mask,
Gateway address, DNS address, NAT address, PPPoE address.

2.6 Internet

Internet Share and Web Brower are both enabled in this menu.
- 15 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V6201 and is the answer not in the manual?

Questions and answers

Table of Contents