Playback - JVC HR-P110AG Instructions Manual

Playback

Playback
NTSC, PAL and MESECAM video tapes
can be played back on this video cassette
player. See "Setting Of The Colour System
Select Buttons" on page 10 for details.
Before proceeding:
Turn on the power of the TV and video
cassette player.
Make sure that the TV is set to the video
channel or that the TV's TV/VIDEO switch
is set to VIDEO (See "Setting the video
channel" on page 8 for details).
COLOUR SP/LP
SYSTEM /EP
A
Load a pre-recorded cassette.
If the safety tab on the cassette is
removed, playback will start
automatically.
B
Press to start playback.
$
"B.E.S.T. PICTURE SYSTEM" appears
on the screen.(when B.E.S.T. is set to
"ON" . (See "Mode set"
Press ¤ or the remote control's 8 to
8
stop playback. Then press ¤ to
remove the cassette.
To fast forward or rewind the tape:
From the stop mode, press Á or 1 .
8
1
STANDBY/REC
POWER-ON
2
pg. 9)
Slow motion playback
Slow motion playback is 1/6 of the normal
playback speed. The sound will be cut
during slow motion playback.
During playback:
A
Press 9 for 2 seconds.
Press
8
playback speed.
NOTES:
If the picture shakes during the slow
mode, use TRACKING +/– to correct the
2
picture.
After approx. 5 minutes, the slow mode
will disengage to protect the video tape.
Still picture and frame advance
Use this feature to freeze the playback
picture and to advance one frame at a time.
The sound will be cut during this mode.
During playback:
A
Press 9.
The picture will be frozen.
B
Press 9 repeatedly to advance
frames.
Each time the button is pressed the still
picture will advance one frame.
Press
8
NOTES:
If the picture shakes during the still mode,
use TRACKING +/– to correct the picture.
After the picture has been frozen for
approx. 5 minutes, the still mode will
disengage to protect the video tape.
to return to the normal
$
to resume normal playback.
$
11