Content 1. Introduction 2. Important safety instructions 3. Packing list 4. Assembly instructions 5. Product overview 6. Before you start 7. Ready to start 8. Tempo 9. Loop Record 10. Preset kits 11. Create kit 12. Creative FX 13. FX 14.
100% Made in Italy production to make innovations and improvements quickly. This quick reference guide will help you get started with your Mark Drum kit. If you have any questions after reading it, we invite you to contact us any time with your comments and questions at: info@ markdrum.it.
For more technical information, please visit us at www.markdrum.it and fill out the form on the Contact Us page. We hope you enjoy your Mark Drum kit and use it to make great music! “The Lightning Flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
Page 4
2. Prècautions d’emploi Lire ces instructions; Conserver ces instructions; Suivre tous les conseils d’utilisations; Suivre toutes les instructions; Ne pas utiliser cet appareil au bord de l’eau; Nettoyer uniquement avec un chiffon humide; Ne pas bloquer le système de ventilation. Installer conformément aux instructions du fabricant; Ne pas installer l’appareil près d’une source de chaleur tel qu’un radiateur, un fourneau, ou bien un autre appareil qui produit de la chaleur;...
Cymbal Arms Box 1 x Kick Pad Kick Box 1 x L300 spiral cable 1 x Curved beater 1 x Sound Module YES Sound Module Box 1 x Power pack 1 x Power cable 1 x HiHat 1 x SD card 4GB...
4. Assembly Instructions Rack Box - Rack Fitting Box - Cymbal Arms Box 18 x (screw long type) (screw long type) (screw short type) 9 x Rack Joint Assembly 7 x Pad Joint Assembly screw long type hexagonal nut screw short type washer washer washer...
Sound Module Box - Crash Box - Tom Box - Ride Box - Snare Box Ride Tom2 Tom1 Crash Sound Module Tom3 Snare note: any pad can be connected to any socket on the rack Kick Box HiHat Box Mount the kick beater so that it hits the kick pad at Put the hi-hat plate and felt on top of the existing the center of its striking surface.
- Once you’ve assembled the kit, connect the pads and turn on the Sound Module’s power. Now you need to set up the hi-hat and calibrate the snare. The Mark Drum system allows you to use your own hi-hat hardware and set its height as you like it, keeping the feel and performance you’re used to.
7. Ready to start Now that everything is assembled and calibrated, you’re ready to discover all the exciting and natural sounding Mark Drum sound presets! Change the “kit” by scrolling through the choices using the UP and DOWN buttons on the Sound Module (above and below the OK button), or use the DIAL CONTROL (28) and press OK to confirm your choice and hear the preset.
12. Creative FX The Mark Drum YES features three types of CREATIVE FX to tailor each kit to your specific tastes. As already mentioned, the “Player Immersion” feature allows you to virtually “move” your listening PLAYER IMMERSION perspective.
Page 12
FX - Preset List • EQ Description 01-Loudness1 Gentle Loudness Boost 02-Loudness2 Loudness Boost 03-Booster Massive Boost 04-Boomy 1 Boomy Room Correction - cut@ 90Hz 05-Boomy 2 Boomy Room Correction - cut@ 80Hz and gentle High Boost • COMPRESSOR Description 01-Gentle Lite compression 02-Classic...
LAYER Natural sounds mixed with synthetic components - PLAYER IMMERSION 04. Power Kit Rock/Alternative LAYER Electronic, with Mark Drum “Kaleidoscope” feature KALEIDOSCOPE 05. Elektro Kit - Electronic/Alternative/Jungle LAYER 06. Heavy Artist Kit Rock kit, super-punchy and focused PLAYER IMMERSION 07.
B - The obligations of Mark Drum are limited to the repair of defects. Warranty repair eligibility will be decided at the sole discretion of Mark Drum or its representatives. Freight, freight insurance costs, and any other costs related to the repair of this product are not covered by this warranty.
Page 15
WARRANTY CARD If any problem occurs, please don’t hesitate to contact our support team at info@markdrum.it. You can fill out this form and send a copy to Mark Drum (Parsek srl, Via Po 52, 66020 San Giovanni Teatino, CHIETI - ITALY).
Page 16
Italy - via Po, 52 - 66020 San Giovanni Teatino (Ch) Tel. +39 085 446 3755 - Fax +39 085 440 7764 www.markdrum.it...
Need help?
Do you have a question about the YES and is the answer not in the manual?
Questions and answers