Hardware Installation; Inserting The Batteries - Silvercrest DMTS2017 User Manual

English

Hardware Installation

Unpack all the devices and use the package contents checklist on page 1 to verify
that you have received all items listed.

Inserting the Batteries

Insert the batteries into the wireless keyboard and wireless mouse as shown in
the following figures. Take care to insert the batteries into the device observing
the correct polarity (+ and – ) The correct polarity is labelled on the batteries and
inside the battery compartment.
Open the battery compartment of the wireless mouse and insert the
batteries. Then close the battery compartment.
Remove the bottom part of the wireless mouse. To do this, press the
unlock button (14) on the back of the wireless mouse. The lock will
release and you can open and remove the bottom part.
Insert the batteries.
Remove the USB nano receiver (C) from its storage compartment (17).
Close the wireless mouse. To do this, insert the noses on the bottom part
into the hole located on the front of the wireless mouse. Then close the
bottom part on the wireless mouse until the unlock button (14) clicks into
place.
10
Wireless keyboard with wireless mouse DMTS2017
Fig.: Detailed view of bottom of the keyboard