Table of Contents
Advertisement
Item
Setting value
UP CONV.
EFULL (00)
MODE
(0405)
HDMI MODE
EAUTO (00)
(0406)
DVI COLOR
ESTANDARD (00)
(0407)
TEST SIGNAL
EOFF (00)
(0408)
PAGE BACK
Up-converts DV input signals or DV/DVCAM recorded tape play-
SIDE P. (01)
back signals, and sets the video mode for output from the COM-
PONENT OUT terminal.
FULL : The 4:3 angle of view is stretched to 16:9 and displayed.
SIDE P:The 4:3 angle of view remains, with both sides in black.
Selects the video mode to output from the HDMI OUT terminal.
RGB (01)
AUTO: Automatically outputs video to match the video mode of
RGB : Outputs RGB video. Use this setting when video is not
Set this item when connecting the HDMI OUT terminal to a DVI
ENHANCED (01)
(Digital Video Interface) terminal on the monitor.
STANDARD : Standard mode. Usually, this setting is used.
ENHANCED: Enhanced mode. Select the video of your choice
Outputs test signals from the built-in video signal generator.
CB (01)
OFF : Does not output test signals.
CB
Memo
These test signals are not controlled for use as standard signals.
Returns to TOP Menu screen.
Description
Set here to up-convert tapes recorded in 16:9.
Set here to up-convert tapes recorded in 4:3.
the connected monitor. Usually, this setting is used.
displayed properly on the connected monitor.
(image quality, color density, black blending).
: Outputs color bar signals.
E-75
Advertisement
Table of Contents
