Table of Contents
Advertisement
Setting related Menu screen
Setting SYSTEM Menu screen
REC LONG P. TIME
This is for setting the time for BR-HD50 to
enter the tape protection mode if there is a
long recording pause.
INDEX WRITE: SYSTEM [2/2] Menu
This is for selecting whether to record index
signals automatically when recording starts.
(SYSTEM menu details: XPage 67 to 69)
Setting VIDEO Menu screen
OUT FORMAT [60]/[50]
Select the EE image format output from the
HDMI OUT terminal and the COMPONENT
OUT terminal. (Cross converter video)
Setting [60]: NATIVE/480I/480P/1080I/720P
Setting [50]: NATIVE/576I/576P/1080I/720P
MONITOR SELECT
To automatically match the EE image format
output from the HDMI terminal to the video for-
mat of the connected display, set this menu
item to HDMI[A].
[Settings: HDMI[A]/OUT FRMT]
DOWN CONV. MODE
The HDV signal is a wide-screen video signal.
When HDV signals are input, the output from
the LINE OUT terminal and Y/C OUT terminal
will be down-converted EE images (480i/576i).
Set the style for displaying the down-con-
verted EE image on a display with a 4:3 aspect
ratio.
This will also apply to down-converted EE
images (480i/576i) output from the COMPO-
NENT OUT terminal.
[Settings: SQUEEZE/LETTER BOX/SIDE-
CUT]
UP CONV. MODE
Up-converts DV input signals or DV/DVCAM
recorded tape playback signals, and sets the
video mode for output from the COMPONENT
OUT terminal.
[Settings: FULL/SIDE P.]
(VIDEO menu details: XPage 73 to 75)
Settings for recording the time code
Select the time code to record, from the data in
the built-in time code generator or from the
time code data input from the IEEE1394 termi-
nal, using TC DUPLI.: DV in the TC/UB/
CLOCK [1/2] Menu screen. To record the time
code from the IEEE1394 terminal, set TC
DUPLI.: DV to AUTO or NON DROP. (In DV
mode only)
(Setting time code recording: XPage 60, 61)
Memo
Audio mode
During digital signal input, the audio mode is
identical to the IEEE1394 terminal input signal
mode.
DV format : 48K, 44.1K, or 32K mode
HDV format : 48K mode
During digital signal input, the AUDIO MODE:
DV setting in the AUDIO menu is invalid.
Time/Date display
During DV signal input, data from the built-in
clock cannot be recorded.
The date/time data input from the IEEE1394
terminal is recorded, regardless of the menu
settings.
E-43
Advertisement
Table of Contents
