Pisector GSM-01 Instruction Manual

GSM SECURITY ALARM SYSTEM

1 System Introduction

Wireless GSM intelligent anti-theft electronic alarm system is an innovative wireless
mobile intelligent warner integrating GSM digital signal processing techniques and
imported STC microprocessor, and a variety of technologies including digital voice
announcer, Chinese SMS, learning code pairing, etc. In addition, this alarm system is
highly automatic, giving automatic voice or SMS alert in the event of emergency without
intensive manual settings required. Features of stability, reliability, safety, and humanizing
control enable it to be widely used for alert in shops, convenience stores, offices, villa as
well as residential communities.
2 Function Introductions
4 wired guard areas and 6 wireless guard areas
6 voice phones and 3 message phones
Remote two-way intercom
3 groups for timly arm/disarm
Telephone (mobile phone) remote control programming
10-second ISD automatic message recording
Built-in artificial intelligent digital voice announcer
Built-in artificial intelligent Chinese message
Alarm locking memory and information clear for easy checking
Enabling guard while going out, enabling guard at home, and enabling guard by
remote control
Wireless intelligent learning encoding and convenient additional accessories
Mobile phone (telephone) enabling guard, disabling guard and monitoring by
remote control
Real-time, delay, all day, bypass guard area
The warning tone of guard enabling and disabling operations by remote control
can be set.
2
E PROM information protection can protect the information from loss after
powering off
Built in NI-HI rechargeable battery is available to provide power supply
automatically after powering off
AC and DC dual use are available for 24-hours-a-day normal guard
Main unit tamper-resistant and low-voltage detecting function conforms to the
3C safety standards.

3 Technical Parameters

Input Voltage:
Standby Current:
Warning Current:
Wireless Frequency:
GSM System:
Backup Battery:
Alarm Loudness:

4 Factory Default

Guard Area Enable
guard
Guard area 1 Valid
Guard area 2 Valid
Guard area 3 (wired) Valid
Guard area 4 (wired) Valid
Guard area 5 (wired) Valid
Guard area 6 (wired) Valid
Remote control Valid
emergency key
Programming password: 8888
Operation Password:
1234
Siren Duration:
180 seconds
5 Installations and Commissioning
Main Unit Installation
Try to install the main unit in the center of guard areas as possible as
you can, for best reception of all the wireless probers. Be careful to keep it
away from large metal objects or household appliances which may cause
high frequency interference, as well as barriers such as reinforced concrete
DC9V~12V
<55mA
<450mA
315MHz, 2262/4.7M
Three-frequency 900/1800/1900MHz
NI-HI AAA*6 DC7.4V
110dB
At Type Alarm
Home Conditions
Real-time Door lock alarm
Real-time Hall alarm
Valid Real-time Window alarm
Valid Real-time Balcony alarm
Valid 24 hours Fire alarm
Valid 24 hours Gas alarm
Valid 24 hours Help alarm
Remote Control: Enabled
:
Ringing Times Once
Warning Siren： Disabled
Siren
On
On
On
On
On
On