NEC DSX-40 Feature Handbook page 76

Extension Locking
4. When you see
NEW PIN ACCEPTED
[EXIT]
[EXIT]
To change your PIN number (if you already have one assigned):
1. Press INTERCOM and dial ##6 .
When you see
2.
ENTER PIN CODE:
• Enter your current PIN number + HOLD .
When you see
3. ENTER NEW PIN:
• Enter your new PIN number + HOLD .
• When entering your PIN number:
- CLEAR erases your entire entry.
- REDIAL backspaces over (erases) the last digit entered.
When you see
4. REENTER NEW PIN:
• Confirm your entry by reentering your new PIN number.
5. When you see
NEW PIN ACCEPTED
[EXIT]
[EXIT]
Unlocking an Extension from the Attendant's Phone
To unlock an extension (and clear the extension's PIN number) from the attendant's phone:
Press INTERCOM and dial ##3 .
1.
• You must have a PIN number entered for your phone to use this feature.
When you see
2. ENTER PIN CODE
• Enter your PIN number + HOLD .
When you see
3.
ENTER EXTENSION
• Enter the number of the extension you want to unlock + HOLD .
4. When you see
CLEAR PIN: xxx
[YES]
[YES]
[NO]
[NO]
68 ◆ Features
Entering or Changing Your PIN Number
:
:
Select to exit PIN number programming.
:
:
, do one of the following:
Select to unlock the extension entered in step 3 above.
Select to back up to step 2 without unlocking.
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
DSX Feature Handbook