NEC DSX-40 Feature Handbook page 74

Extension Hunting
Operation
Sending a Call to a Terminal or Circular Hunting Group
To send a call to a Terminal or Circular Hunting Group:
1. Do one of the following.
a. Transfer an outside call to a hunt group member.
b. Set up a DIL to a hunt group member.
c. Place a ringing Intercom call to a hunt group member.
d. Set up a hunt group member as a line's overflow destination.
To send a call to a UCD Group:
Do one of the following.
1.
a. Transfer a call to the UCD Group master number.
b. Set up a DIL to the UCD Group master number.
Place an Intercom call to the UCD Group master number.
c.
d. Set up the UCD Group master number as a line's overflow destination.
Removing/Reinstalling your Extension from your UCD Group
To temporarily remove/reinstall your extension from your UCD Group:
1. Press INTERCOM and dial *5 .
2. Do one of the following:
a. Dial 4 to return your extension to your UCD Group.
b. Dial 6 to remove your extension from your UCD Group.
3. Press SPEAKER to hang up.
66 ◆ Features
Sending a Call to a UCD Group
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
DSX Feature Handbook