EAP plug-in settings
●
according to the instructions from your service
provider.
Pre-shared key
— Enter a password. The same
●
password must be entered on the WLAN access
point device.
WPA2 only mode
— Only WPA2 enabled devices are
●
allowed to establish a connection in this mode.
Advanced WLAN settings
Select
Options
Advanced settings
>
following:
IPv4 settings
— Enter the IP address of your device,
●
the subnet IP address, the default gateway, and the IP
addresses of the primary and secondary DNS servers.
Contact your internet service provider for these
addresses.
IPv6 settings
— Define the type of DNS address.
●
Ad-hoc channel
(only for Ad-hoc) — To enter a
●
channel number (1-11) manually, select
defined.
Proxy server address
●
proxy server.
Proxy port number
●
Active data connections
Select
Menu
Settings
>
Connection
mgr..
In the active data connections view, you can see open data
connections:
© 2009 Nokia. All rights reserved.
— Enter the settings
and from the
User
— Enter the address for the
— Enter the proxy port number.
and
Connectivity
>
data calls
packet data connections
wireless LAN (WLAN) connections
To end a connection, select
To end all open connections, select
Disconnect
all.
To view the details of a connection, select
Details.
Synchronisation
Select
Menu
Settings
>
transfer
> Sync.
The Synchronisation application enables you to
synchronise your notes, calendar entries, text and
multimedia messages, browser bookmarks, or contacts
with various compatible applications on a compatible
computer or on the internet.
You may receive synchronisation settings in a special
message from your service provider.
A synchronisation profile contains the necessary settings
for synchronisation.
When you open the application, the default or previously
used synchronisation profile is displayed. To modify the
profile, tap a synchronisation item to include it in the
profile or to leave it out.
Connectivity
Options
> Disconnect.
Options
>
Options
and
Connectivity
Data
>
>
71