Packet Data Access Points - Nokia 5800 XpressMusic User Manual

that network and define the order in which the access
points are used.
For example, you can add wireless LAN (WLAN) and packet
data access points to an internet access point group, and
use the group for browsing the web. If you give WLAN the
highest priority, the device connects to the internet
through WLAN, if available, and through a packet data
connection if not.
To create a new access point group, select
Manage New destination.
>
To add access points to an access point group, select the
group and Options New access
>
existing access point from another group, select the
group, tap the relevant access point if it is not already
highlighted, and select Options
other dest..
To change the priority of an access point within the group,
select Options Organise
>

Packet data access points

Select Menu Settings
>
Destinations Access
>
instructions on the screen.
To edit a packet data access point, open one of the access
point groups, and select an access point marked with
.
Follow the instructions from your service provider.
Select from the following:
© 2009 Nokia. All rights reserved.
Options
point. To copy an
Organise Copy to
> >
Change priority.
>
and Connectivity
>
point, and follow the
Access point name
●
name from your service provider.
User name — The user name may be needed to make
●
a data connection, and is usually provided by your
service provider.
Prompt password
●
every time you log in to a server, or if you do not want
to save your password in the device, select Yes.
Password — A password may be needed to make a
●
>
data connection and is usually provided by your service
provider.
Authentication
●
password encrypted or
encrypted when possible.
Homepage — Depending on the access point you are
●
setting up, enter the web address or the address of the
multimedia message centre.
Use access point
●
want the device to ask for confirmation before the
connection using this access point is created, or
Automatically
destination using this access point automatically.
Select Options
>
following:
Network type
●
transfer data to and from your device. The other
settings depend on the selected network type.
Phone IP address
●
address of your device.
DNS addresses
●
primary and secondary DNS servers, if required by your
— You obtain the access point
— If you must enter the password
— Select Secure to always send your
Normal to send your password
— Select After confirmation
if you want the device to connect to the
Advanced settings and from the
— Select the internet protocol type to
(for IPv4 only) — Enter the IP
— Enter the IP addresses of the
Connectivity
if you
69