Table of Contents
Advertisement
Model E.T. PEGASUS
MANUAL MECHANICAL ACCELERATOR
(PEGASUS 38.16)
(fig.74/C Pos."1")
Allows to accelerate the engine revs and keep them con-
stant without pressing the accelerator pedal.
To activate the accelerator:
- Pull the lever towards yourself to increase the engine revs.
At end run the engine will be at maximum revs.
- Push the lever towards the front of the cab to decrease
the engine revs. At end run the engine will be at mini-
mum revs.
- ATTENTION:
Minimum engine revs is 900 rpm.
The maximum engine revs allowed with accelerator in ma-
nual mode is 2500rpm.
- ATTENTION:
On switch-off of the vehicle, the engine must always be ta-
ken to minimum revs.
- ATTENTION:
Do not use the manual accelerator in cab during use of the
basket and/or of the radio control.
- ATTENTION:
With manual accelerator engaged, the vehicle does not run,
the hydrostatic drive is disengaged.
C/44
(fig.74/C)
- CAUTION:
- Read the SAFETY REGULATIONS (in this manual) carefully for the safety of all personnel and the machine.
Getting to know and using the machine
1
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Pegasus and is the answer not in the manual?
Questions and answers
КАК ПРОДЛИТЬ СРОК ЭКСПЛУАТАЦИИ?
To extend the lifespan of a Dieci Pegasus, follow these maintenance steps:
1. Regular Water Purifier Maintenance: Change the water every 8 working hours and clean the purifier every 300 working hours. Use the TAM additive to keep it clean and improve performance.
2. Engine Maintenance: Check and maintain the FPT (Fiat Powertrain Technology) engine, which includes monitoring the oil dipstick, fuel filter, and oil filter.
3. Cooling System Care: Ensure the radiator at the back is clean and functioning properly.
4. Transmission and Axles: Maintain the hydrostatic transmission (0-40 km/h) and Dyna Spicer axles, which include oil bath braking systems.
5. Follow Safety Regulations: Adhere to all safety guidelines in the manual to prevent damage and ensure safe operation.
By performing these regular maintenance tasks, the machine's lifespan and efficiency can be maximized.
This answer is automatically generated
Перечень работ при выполнении частичного технического обслуживания и полного технического обслуживания
The maintenance tasks for Dieci Pegasus include:
Partial Technical Service:
- Clean diesel injection pump filter
- Replace hydraulic system oil
- Replace oil tank pre-filter
- Replace external hydraulic oil filter
- Check oil level in differential sump
- Check oil level in epicyclic reduction gears
- Check gear oil level
- Check turret rotation reduction gear oil level
- Tighten boom sliding blocks
- Check chain tension
Full Technical Service (Special Maintenance):
- Replace the coolant
- Replace oil in differential sump
- Replace oil in epicyclic reduction gears
- Replace gear oil
Maintenance must be performed by qualified personnel and comply with DIECI’s service schedule to ensure machine safety and performance.
This answer is automatically generated
Добрый день! Хочу поинтересоваться, можно ли заказать у вас Руководство по эксплуатации DIECI PEGASUS 40.25 ?