Starting A Videoconference Using Sip; Calling Remote Parties - Sony PCS-1 Operating Instructions Manual

Starting a Videoconference Using SIP

Calling Remote Parties

To call a remote party registered in the Phone Book
1
Select "Phone Book" in the launcher menu, then press the PUSH ENTER
button.
The Phone Book menu appears.
2
Use the V, v, B or b button on the Remote Commander to select a remote
party from the Phone Book, then press the PUSH ENTER button.
The submenu appears.
3
Use the V or v button on the Remote Commander to select "Dial", then
press the PUSH ENTER button, or press the CONNECT/DISCONNECT
(
The system begins dialing the party selected in step 2. "Dialing (SIP)" appears
on the monitor screen, and the ON LINE indicator (blue) on the
Communication Terminal blinks.
When the System connects to the system on the remote site, the message
"Meeting starts!" appears on the screen, and the ON LINE indicator stops
blinking and lights.
To call a remote party not registered in the Phone Book
The basic procedure is the same as that for a normal point-to-point
videoconference.
For details of the procedure, see "To call a remote party not registered in the
Phone Book" of "Calling a Remote Party" on page 86.
1
Select "Dial" in the launcher menu to display the Dial menu.
210
Starting a Videoconference Using SIP
Phone Book
RECENT
IP
TOKYO Bob
SIP ISDN
Jack NEW YORK
Jack
0.0.0.0
/ ) button on the Remote Commander.
Recent
0-9
John
A-I
J-S
T-Z
IP
Dial
PARIS
Edit
Copy
Delete