Using The Lan Cascade And Isdn Connection - Sony PCS-1 Operating Instructions Manual

Using the LAN cascade and ISDN connection

Installing both the PCS-323M1 H.323 and PCS-320M1 H.320 MCU software
in two Communication Terminals enables cascade connection including two
main terminals. Connecting four terminals to one main terminal allows you to
conduct a multipoint videoconference via a LAN and ISDN among up to ten
points.
ON LINE POWER LAN ALERT
PCS-323M1
PCS-320M1
Note
Be sure to make connection between two Communication Terminals via LAN. Even if
the PCS-320M1 H.320 MCU software is installed in both the Terminals, cascade
connection via an ISDN is not available.
176
Connection Examples for a Multipoint Videoconference
ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
LAN *
PCS-323M1
PCS-320M1
ON LINE POWER LAN ALERT ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
* Be sure to use a LAN connection.
ON LINE POWER LAN ALERT