The Control Panel - Hoover washing machine Instruction Book

The Control Panel

Start/Pause
Button
20°
Programme
Buttons
Turning the Machine On
Pressing the ON/OFF (
Start Pause Button
START
After selecting the programme and the required options press the Start Pause button
once to start the wash cycle. There will be a short time delay to the start of the
programme while the machine sets the wash parameters for the selected programme
and options. The Door Locked and KG Mode indicator lights will also illuminate a few
seconds after pressing the Start Pause button.
In some programs in the initial phase of the cycle there are planned spin sequences to
ensure optimal wash results.
PAUSE
The programme may be paused at any time during the wash cycle by holding down
the Start Pause button for about two seconds. The door locked indicator light will
remain illuminated for approximately 2 minutes. The door can be opened when this
indicator goes out. To restart the programme, press the Start Pause button once again.
Cancelling and Changing the Programme
To cancel the programme hold down the START/PAUSE button for about five seconds.
Select a new programme and start as detailed above.
Temperature
On/Off
Button
Cottons
60°C
40°C
Spin Speed
Button
) button will turn the machine on.
15
Button
LCD
Display
Stain
Night
& Day Blaster
Pre
Wash
Delay Start
Button
Sensitive Wash Time
Care
Button
Rinse
Easy Iron
Hold