Canon MX860 series Manual page 602

Scanning Multiple Documents from the ADF (Auto Document Feeder) in...
>
Advanced Guide Scanning
ScanGear (Scanner Driver) > Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode
Scanning Multiple Documents from the ADF (Auto Document
Feeder) in Advanced Mode
In Advanced Mode, you can specify the image brightness, color tone, etc. and scan multiple documents
placed on the ADF (Auto Document Feeder) at one time.
When scanning from the ADF (Auto Document Feeder), documents are scanned without preview.
1.
Place the documents on the ADF (Auto Document Feeder), then start ScanGear
(scanner driver).
Placing Documents (ADF (Auto Document Feeder))
Starting ScanGear (Scanner Driver)
2.
Click Advanced Mode and select Document (ADF Simplex) or Document (ADF
Duplex) for Select Source.
Note
Settings are not retained when you switch between modes.
3.
Set Paper Size, Original Orientation and Color Mode.
Input Settings
Note
You can specify how to output the paper when scanning both sides from the ADF (Auto
Document Feeder) in ADF Duplex Paper Output Settings on the Scan tab of the Preferences
dialog box.
Scan Tab
4.
Set Output Settings.
Output Settings
>
Scanning with Other Application Software
>
Scanning with Advanced Settings Using
Pagina 602 din 1009 pagini