Canon MX860 series Manual page 581

Scanner Button Settings Tab (Open with Application)
>
Advanced Guide Scanning
Button Settings Tab (Open with Application)
Scanner Button Settings Tab (Open with Application)
On the Scanner Button Settings tab, you can specify the following settings.
This section describes the settings available when Select Event is Open with application.
You can specify how to respond when scanning using the Operation Panel of the machine with the scan
mode set to Open with application.
Event
Select Event
Displays the scan modes that can be selected on the Operation Panel of the machine. Select Open
with application.
Document Type
Select the type of document to be scanned.
When Document (ADF duplex) is selected, both sides of the documents are always scanned
automatically from the ADF (Auto Document Feeder).
Important
To scan correctly, select a document type that matches the document to be scanned.
Actions
Scan Settings
Document Size
Select the size of the document to be scanned.
When scanning both sides of the documents from the ADF (Auto Document Feeder), select A4 or
Letter.
When you select Custom, a screen in which you can specify the document size appears. Select a
Units, then enter the Width and Height and click OK.
>
Scanning with the Bundled Application Software
Pagina 581 din 1009 pagini
> MP Navigator EX Screens
> Scanner