Nat; Forwarding - TP-Link Archer C7 AC1750 User Manual
Archer c7 ac1750 wireless dual band gigabit router
Hide thumbs
Also See for Archer C7 AC1750:
- Quick start manual ,
- Manual (9 pages) ,
- Quick installation manual (4 pages)
Table of Contents
Advertisement
There are two states of the print server, as follows.
Online - Indicates the print service has been turned on, and no user is using the print service
at present. You can click the "Stop" button to stop the print service.
Offline - Indicates the print service feature is disabled. You can click "Start" button to start the
print service.
4.11 NAT
Choose "NAT", and you can enable or disable the NAT and Hardware NAT Control feature. The
NAT Rules and Hardware NAT will work properly only when the NAT Control feature is enabled.
Current NAT Status - If enabled, the NAT function and the Forwarding configuration will take
effect. If disabled, neither NAT function nor Forwarding configuration will take effect.
Current Hardware NAT Status - If enabled, the Hardware NAT feature will take effect. If
disabled, neither Hardware NAT feature will take effect.
4.12
Forwarding
Figure 4-58 The Forwarding menu
There are four submenus under the Forwarding menu (shown in Figure 4-58): Virtual Servers,
Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the
corresponding function.
Archer C7
AC1750 Wireless Dual Band Gigabit Router
Figure 4-57 The Forwarding menu
- 67 -
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Archer C7 AC1750 and is the answer not in the manual?
Questions and answers
I forgot my username and password for my AC1750 wireless router
To reset the username and password for the TP-Link Archer C7 AC1750 wireless router, follow these steps:
1. Reset to Factory Defaults: Press and hold the reset button on the router for about 10 seconds until the router restarts. This will restore all settings, including the username and password, to default values.
2. Default Login Credentials:
- Username: `admin`
- Password: `admin`
3. Change the Password:
- Log in to the router's web interface using the default credentials.
- Navigate to the settings menu where you can update the username and password.
- Enter a new password and save the changes.
Note: Resetting the router will erase all custom settings, including Wi-Fi names and passwords.
This answer is automatically generated
Laptop unable to access wifi