NEC Univerge SV8100 Features And Specifications Manual page 855

UNIVERGE SV8100
Feature Name
Flexible System Numbering
Flexible Timeouts
Forced Trunk Disconnect
Group Call Pickup
Group Listen
Handset Mute
Handsfree
Handsfree Answerback/Forced
Intercom
Headset Operation
Hold
Hotel/Motel
Hotline
Howler Tone Service
InMail
Intercom
IP Multiline Station (SIP)
IP Single Line Telephone (SIP)
IP Trunk – (SIP) Session Initiation
Protocol
IP Trunk – H.323
ISDN Compatibility
K-CCIS – IP
K-CCIS – T1
Last Number Redial
Line Preference
Long Conversation Cutoff
IP Multiline Station (SIP) – ML440/G566/G266 with AP400/AP300
Table 2-46 Supported System Feature List (Continued)
ML440 G566
Yes Yes
Yes Yes
No No
Yes Yes
No No
Yes Yes
Yes Yes
No No
Yes Yes
Yes Yes
No No
Yes No
No No
Yes Yes
Yes Yes
Yes No
No Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes No
Yes Yes
G266
Yes
Yes
No
Yes
No
Yes This is a function of the handset.
Yes This is a function of the handset.
No
Yes This is a function of the handset.
Yes G566/G266 supported system hold only.
No
No Ml440 – The ML440 does not follow Hotline for
speaker 20-08-19 only Hotline for hand piece
20-08-09.
No
Yes Voice mail softkeys are not provided to handset. Live
monitor is not supported.
Yes
No
Yes
Yes
Yes
Yes
Yes The following programs must be disabled, set to 0,
when using a ML440 handset in a CCISoIP network:
Peer-to-Peer – 10-26-04 (0)
Link Reconnect – 50-06-01 (0)
Yes
Yes Call Redial function is a function of the handset.
No
Yes With ML440 an alarm tone is not provided before
cutoff.
Issue 13.0
Comments
2 - 821