Using The Cassette Deck (Listening To A Tape); One Touch Play; Regular Play - JVC /CA-D451TR Instructions Manual

Using the Cassette Deck
(Listening to a Tape)
1 2 3
CLOCK TIMER PTY/EON
4 5 6
SLEEP
– SELECT + DISPLAY MODE
SHIFT
7 8 9
SET
FM/AM
10 10 FM MODE
DISC AUX
PLAY MODE
7 £/8
DISC
/CLEAR
C D
DISC
A B
DECK
REC PAUSE
VOLUME
SOUND ACTIVE
MODE BASS EX.
RM-SED40TRU
REMOTE CONTROL
Display
CONT. RANDOM
ALL PRGM
: Tape Direction indicator
: DECK A, B indicator
: Reverse Mode indicator
EJECT EJECT
22
DISC
DISC
DISC
DISPLAY
PTY/EON
STANDBY
SELECT +
/ON
SELECT –
Cassette Deck
PHONES
control buttons
0 EJECT (Deck A)
kHz
MHz
A.BASS EX S.MODE
TA NEWS INFO EON
CLOCK ST
REC SLEEP MONO
The Cassette Deck allows you to play, record and dub audio tapes.
o With Automatic Tape Detection, you can listen to type I or II tapes without changing any settings.
The use of tapes longer than 120 minutes is not recommended, since characteristic deterioration may
occur and these tapes easily jam in the pinch-rollers and the capstans.
One Touch Play ——————————————————————
By pressing the ¤ TAPE ‹ button (or the 2 or 3 button on the Remote Control), the Unit will come
on, "TAPE" appears in the display, and if a tape is in the deck, it will start to play. If no tape is loaded, the
Unit will come on and wait for you to insert a tape, or select another function.

Regular Play

When the power is already on, you can use this basic procedure:
1. Press the 0 EJECT button for the deck you want to use.
2. When the cassette holder opens, put the cassette in, with the
exposed part of the tape down, toward the base of the System.
If the cassette holder does not open, turn the Unit off, then back on and press the 0 EJECT button
•
again.
COMPACT
DIGITAL AUDIO
3
DISC
TRIPLE TRAY
PLAY & EXCHANGE SYSTEM
MODE
STANDBY
VOLUME
MULTI CONTROL
TUNING TUNING
DOWN UP P. DOWN P. UP
REC
DUBBING CD REC START
FM
1 BIT START/STOP
/AM
DECK A/B REVERSE MODE
DUAL D/A CONVERTER
A
AUTO REVERSE AUTO REVERSE
PLAY REC/PLAY
FULL-LOGIC CONTROL
EJECT EJECT
AUTO TAPE SELECTOR
0 EJECT (Deck B)
Tape Direction Indicator on the Display
The Tape Direction indicator tells you which direction the selected
tape deck will use for playback.
During playback, the direction indicator blinks slowly.
During fast left or fast right, the indicator blinks quickly.
During Music Scan mode, the direction indicator alternates between
blinking slowly and quickly repeatedly.
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
REPEAT
RANDOM
CONTINUE
SOUND
4 P.DOWN
MODE
ACTIVE
BASS EX.
7
¢ P.UP
CD
¤ TAPE ‹
AUX
TAPE
REVERSE MODE
DECK A/B
B