Caller Id Name Set - Panasonic KX-TD816 Installation Manual

4.3 System Programming
Description
Selection
Default
Programming
Conditions
Feature References
*: Available for KX-TD816C/1232C and
KX-TD816HK/1232HK only.

Caller ID Name Set*

With Caller ID Service, the calling party is displayed either by its
ID Code or by its name. If the name display is required, use this
program to give a name to a caller ID Code stored in program [110]
"Caller ID Code Set."
• Location number: 001 through 500
• Caller ID Name: 15 characters (max.)
All locations – Not stored
1. Enter 111.
Display: Caller ID Name
2. Press NEXT.
Display: Location NO?–>
3. Enter a location number.
To enter location number 001, you can also press NEXT.
Display example: 001:Not Stored
4. Enter a Caller ID Name.
For entering characters, see Section 4.1.3 "Entering Characters."
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new name.
5. Press STORE.
6. To program another location, press NEXT or PREV, or
SELECT and the desired location number.
7. Repeat steps 4 through 6.
8. Press END.
• There is a maximum of 500 Caller ID Names, which corresponds to a
maximum of 500 Caller ID Codes stored in program [110] "Caller ID
Code Set. "
• Each name has a maximum of 15 characters.
Section 3, Features,
Caller ID
System Programming
111
4-43