4.3
System Programming
Description
Selection
Default
Programming
Flexible Numbering
Assigns the leading digits of extension numbers and feature
numbers for system features.
• Selection number: 01 through 53 (See "Feature Number List" on
• Feature number: 1 or 2 digits (for selection numbers 01 through
See "Feature Number List" on page 4-31.
1.
Enter 100.
Display: FLX Numbering
2.
Press NEXT.
Display: Select NO?–>
3.
Enter a selection number.
To enter selection number 01, you can also press NEXT.
Display example: 01. 1—EXT BL:1
4.
Enter the feature number.
To delete the feature number, press CLEAR.
To change the current entry, press CLEAR and the new number.
5.
Press STORE.
6.
To program another selection, press NEXT or PREV, or
SELECT and the desired selection number.
7.
Repeat steps 4 through 6.
8.
Press END.
To remove all the feature numbers except selection numbers
(01) through (16) 1st through 16th extension blocks;
1.
Enter 100.
2.
Press NEXT.
page 4-31 for the corresponding features.)
16);
1 through 3 digits (for selection numbers 17
through 53)
System Programming
100
4-29