Transferring Raw+Jpeg Images - Canon EOS-1D X Instruction Manual

d Transferring Images to a Personal Computer
After the EOS Utility screen appears, do not operate EOS Utility. If any
screen other than EOS Utility's top screen is displayed, [Direct transfer] in
step 5 on page 322 will not be displayed. (The image transfer function will
not be available.)
If the EOS Utility screen does not appear, refer to the EOS Software
Instruction Manuals Disk (p.421).
Before disconnecting the cable, turn off the camera. Hold the plug (not
the cord) to pull out the cable.
You can also transfer images to an ftp server via a wired LAN connected
to the Ethernet RJ-45 terminal (p.21). For details, refer to the separate
"Wired LAN Instruction Manual" on the EOS Wired LAN Instruction
Manuals Disk

3 Transferring RAW+JPEG Images

The [RAW+JPEG transfer] setting will change automatically in relation with
the setting for [Communication settings] → [Network settings] → [Set
up] → [Transfer type/size] → [RAW+JPEG transfer].
320
Set the camera's power switch to
3
<1>.
When the personal computer prompts
you to select a program, select [EOS
Utility].
The EOS Utility screen will appear on
the personal computer.
For RAW+JPEG images, you can specify
which image to transfer. On the next
page in step 2, select [RAW+JPEG
transfer], and select the images to be
transferred: [JPEG only], [RAW only], or
[RAW+JPEG].