Canon EOS-1D X Instruction Manual page 104

3 Customizing AF Functions
25
Manual AF point selection pattern
During manual AF point selection, the selection can either stop at the outer edge
of the area AF frame or it can move to the opposite AF point. This function works
in AF area selection modes other than 61-point automatic selection AF and Zone
AF. (It takes effect in 61-point automatic selection AF only with AI Servo AF.)
AF point display during focus
You can set whether or not to display the AF point(s) in the following cases: 1.
When selecting the AF point(s), 2. When the camera is ready to shoot (before
AF operation), 3. During AF operation, and 4. When focus is achieved.
: Selected (pre-AF, focused)
The selected AF point(s) is displayed for 1, 2, and 4.
: Selected (focused)
The selected AF point(s) is displayed for 1 and 4.
OFF: Disable display
For 2, 3, and 4, the selected AF point(s) will not be displayed.
If [Selected (pre-AF, focused)] or [Selected (focused)] is set, the AF point
will not be displayed even when focus is achieved with AI Servo AF.
104
: Stops at AF area edges
Convenient if you often use an AF point
along the edge.
: Continuous
Instead of stopping at the outer edge, the
selected AF point continues to the
opposite side of the area AF frame.
: Selected (constant)
The selected AF point(s) is always
displayed.
: All (constant)
All 61 AF points are always displayed.