Frequency Direct Entry - Kenwood TH-D72A Instruction Manual

FREQuENCy dIRECT ENTRy

If the desired operating frequency is far from the current frequency, using the
keypad is the quickest way to change the frequency.
1 Press [A/B] to select band A or B, then press [VFO] or [CALL].
2 Press [ENT].
• The Direct Frequency Entry display appears.
3 Press the number keys ([0] ~ [9]) to enter your desired frequency.
4 To set the entered frequency, press [ENT] or [VFO].
Pressing [ENT] before entering all of the digits will set the remaining digits to 0.
•
Pressing [VFO] before entering all of the digits will leave the remaining digits at their
•
previous values.
• Entering all digits for a frequency will automatically set the frequency without
pressing [ENT] or [VFO].
If you need to only change the MHz digit, press [MHz], then enter the new value.
•
19