Connecting To A Pc; Connecting To An Extanal Gps Unit Or Weather Station - Kenwood TH-D72A Instruction Manual

cONNEcTINg TO A Pc

The USB connector allows you to directly connect to a computer by using a
supplied USB. You must use the ARUA-0 software to control the USB audio
system line of the PC, available at:
http://www.kenwood.com/i/products/info/amateur/software_download.html
PC

cONNEcTINg TO AN ExTANAl gPS uNIT OR WEAThER STATION

The GPS jack on this transceiver accepts a .5 mm (/0") -conductor plug. If
necessary, use the cable (service part: E0-400-XX) to modify the cable end of
extanal GPS receiver or Weather Station.
Extanal GPS receiver
5 3 2
• Use a GPS receiver which conforms to the NMEA-08 format and is compatible with
RS-C signal polarity output at the below mentioned levels.
[Low level: less then +0.5 V / High level: more then + V]
You cannot use GPS receivers with USB-type connections.
White
(to DATA IN on GPS/ WX)
Red
(to DATA OUT on GPS/ WX)
Shield
(to GND on GPS/ WX)
USB terminal
Supplied USB cable
Weather Station
COM terminal