Table Top Stand: PDK-TS01
2) Instructions for using the main display packing material as a stand while working on the panel
Main Plasma Display packaging setup
Outer box
Inner box frame
Pad
Mirror mat
Pad
Plasma Display
1 Construct the stand for the Plasma Display using the inner box frame and pads shown in the figure above.
Pads
Inner box frame
2 Set the Plasma Display down on the pads as shown in the figure below.
Plasma Display
Mirror mat
Inner box frame topped by two pads
3 Follow the instructions in Steps 1-4 in "Normal Installation" to attach the stand to the Plasma Display.
62