Maintenance Mode; Executing A Maintenance Item - Kyocera FS-C8600DN Service Manual

1-3-1 Maintenance mode

1-3 Maintenance Mode
The machine is equipped with a maintenance function which can be used to maintain and service the
machine.

(1) Executing a maintenance item

Perform this operation when the panel displays
Ready to print or that the cover is open.
Press the menu key while pressing and
holding the OK and down cursor keys
Press the Right Select key for [Enter].
Enter the maintenance item
number using the numeric keys.
The selected maintenance item is run.
Yes
Yes
Enter 001 using the numeric keys
Start
simultaneously.
Enter "10871087" using
the numeric keys.
Press the OK key.
Press the Back key.
Repeat the same
maintenance item?
No
Run another maintenance
item?
No
and press the OK key.
End
1-3-1
( 0 -16digit)
Maintenance mode is exited.
2MN/2N1