Toshiba e-STUDIO350 Service Handbook page 189

Classifi-
Code
cation
481 Paper Automatic change of paper
feeding source
482 Paper Feeding retry setting
feeding
483 Laser Pre-running rotation of
polygonal motor
484 Laser Polygonal motor rotational
status switching at the Auto
Clear Mode
485 Laser Rotational status of polygo-
nal motor on standby
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Setting mode (08) <e-STUDIO352/353/452/453>
Func-
Items
tion
PPC
ALL
ALL
ALL
ALL
2 - 169
07/11
Default
<Accept-
RAM Contents
able
value>
1 SYS Sets whether or not
<0-2> changing the drawer
automatically to the
other drawer with the
paper of the same size
when paper in the
selected drawer has run
out.
0: OFF
1: ON (Changes to the
drawer with the
same paper direc-
tion and size: ex. A4
to A4)
2: ON (Changes to the
drawer with the
same paper size.
Paper with the dif-
ferent direction is
acceptable as long
as the size is the
same: ex., A4 to A4-
R, LT-R to LT. "1" is
applied when the
staple/holepunch is
specified.)
0 M 0: ON
<0-1> 1: OFF
0 SYS Sets whether or not
<0-2> switching the polygonal
motor from the standby
rotation to the normal
rotation when the origi-
nal is set on the RADF
or the platen cover is
opened.
0: Valid (when using
RADF and the origi-
nal is set manually)
1: Invalid
2: Valid (when using
RADF only)
0 SYS Sets whether or not
<0-1> switching the polygonal
motor from the normal
rotation to the standby
rotation at the Auto
Clear Mode.
0: Valid
1: Invalid
0 SYS Sets the rotational sta-
<0-1> tus of polygonal motor
on standby.
0: Rotated (The rota-
tional speed is set at
08-490.)1: Stopped
e-STUDIO350/352/353/450/452/453
ERROR CODE AND SELF-DIAGNOSTIC MODE
Pro-
cedur
e
1
2
1
1
1
1