Using The Color Cartridge Test Sheet - HP DesignJet 330 User Manual

350C

Using the Color Cartridge Test Sheet

Some of the circumstances in which it is useful to use the Color Cartridge Test
Sheet are explained in chapter 9,"Troubleshooting". It achieves two objectives:
It tells you which cartridge, if any, is not performing correctly.
It lets you check the alignment of the four cartridges to each other and, if
necessary, adjust it.
1
Load a sheet of A-size or A4-size plain paper, in portrait orientation.
Make sure you have selected
(see page 2–3). For this plot, the plotter sets the print quality level
automatically.
Plot will be on underside.
For help on how to load a sheet, either refer to the pictures on the
right-hand side of the plotter's media-entry slot, or see the section starting
on page 2–9. Note that you cannot print the Color Cartridge Test Sheet on
roll media. To load a sheet with the the roll-feed option installed, see page
2–26.
This is the black on page 5–7 (seq: 99)
This is the cyan on page 5–7 (seq: 99)
Company confidential. Pelican User's Guide, Ed 1, Final. Freeze Status: frozen
Localization Note. JKCT: This page very similar to Parrot UG p3-7.
Using the Color Cartridge Test Sheet
Plain as the media type on the front panel
This is the magenta on page 5–7 (seq: 99)
This is the yellow on page 5–7 (seq: 99)
Special internal plots
1750
5–7