Install The Ink Cartridge Bay Cover - HP Designjet 8000s Series Installation Manual

Unpacking and Installation

Install the Ink Cartridge Bay Cover

1 At the left rear of the printer, remove the protection tubes (1) from the Ink
Cartridge Connectors in the Ink Cartridge Bay.
2 Hold the Ink Cartridge Bay Cover (1) in position over the Ink Cartridge Bay
and install one screw (2) on each side.
Once the Printer is assembled, move the printer to the installation site
specified by the customer. When the printer is in position, lock ALL the
wheels by pressing the side of the lever marked On (1).
4-18
HP Designjet 8000s Series Printer Installation Guide