Rear Panel Terminals - JVC LST0728-001B Instructions Manual

Getting Started

Rear Panel Terminals

Rear I/O Terminals
Terminal
[ALARM IN]
Memo :
● Set the impedance at the output end to 10 kK or lower.
[EMERGENCY]
[ALARM RESET]
Memo :
● Set the impedance at the output end to 10 kK or lower.
[EXT REC IN]
Memo :
● Set the impedance at the output end to 10 kK or lower.
[OPE ON/OFF]
Memo :
● Set the impedance at the output end to 10 kK or lower.
[REC TALLY]
[ALARM OUT]
[WARNING OUT]
[OPTION OUT1]
[OPTION OUT2]
(External Pull-up Level)
The make contact is formed using the individual output terminals and the COM terminal.
Turning off the power of this unit switches the output of the output terminals to break.
Name of Input Event
Alarm IN 1 to 8 Falling (VR-N1600U/E)
Alarm IN 1 to 4 Falling (VR-N900U)
250 ms and
above
Make
250 ms and
above
1 s and above
OPE ON
Name of Output Event
Set output Option Out 1,2 high
Name of Input Event
Alarm IN 1 to 8 Rising (VR-N1600U/E)
Alarm IN 1 to 4 Rising (VR-N900U)
250 ms and
above
Approx.
50 ms
OPE OFF
Name of Output Event
Set output Option Out 1,2 low
Make Output
250 ms and
above
Break
Remarks
Make Contact Input
Make Contact Input
Make Contact Input
Make Contact Input
Auto Collector Output
(DC15V, 10 mA and
below)