Table of Contents
Advertisement
Applications
Connecting to a Computer
(continued)
Login to NVR Viewer (Continued)
2
Specify your login information in the following
fields
VR-N1600U/E
User name :vr-n1600
Password :vr-n1600
Item
A
Server
For specifying the IP address and port
number of this unit. (For example, in the case
address
of [http://192.168.1.253:80], [:80] is the port
number.)
The port number is the number as specified
in [Server Configuration] under [Image
Server Setting]. (A Page 77)
B
Authentication For selecting one of the three types of
authentication.
Select Basic authentication .
Windows
Windows authentication. Login as the current
authentication
Windows user.
(current user)
Windows
Windows authentication.
authentication
You can login as a Windows user, but a user
name and password will be required.
Basic
Basic authentication.
authentication
A user name and password will be required
to login to this unit.
C
User name
For entering the Windows user name if you
have selected Windows authentication for
the [Authentication] item B. For entering the
user name registered in the [User
Administration] item under [Image Server
Setting](A Page 118) if you have selected
Basic authentication .
D
Password
For entering the login password for this unit if
you have selected Windows authentication
for the [Authentication] item B. For entering
the password registered in the [User
Administration] item under [Image Server
Setting](A Page 118) if you have selected
Basic authentication .
A
B
C
D
E
F
VR-N900U
User name : vr-n900
Password :vr-n900
Description
Item
E
Remember
Saves the password.
If you have selected Windows
password
authentication or Basic authentication for
the [Authentication] item B, selecting this
check box enables you to login the next time
simply by clicking the [Connect] button.
F
Auto-login
Enables you to login automatically. Select
this check box to enable you to login to [NVR
Viewer] automatically.
3
Click the [Connect] button
● The NVR Viewer screen appears after a short while.
Memo :
● If you have previously logged in to the NVR Viewer, a message
will appear asking if you want the view that was used during the
last login to be displayed. (Only when connecting from a
surveillance computer)
[Main View]:
Select this check box to restore the view that you last
used in the main window of the [NVR Viewer].
[Detached Views]:
Select this check box to display the views on the [Primary
Display] screen, multi-monitor, or floating screen.
Note :
● When you log out after reaching the maximum number of
distribution clients, you may need to wait for several minutes
before you can establish the connection again.
● When multiple computers are connected and audio sound is
played back, the sound may be distorted.
4
Set the display language according to the
country of use
A
Click the [K] button at the top right corner of the
screen.
B
Select [Language] from the menu that appears.
C
Select the language used in your country from the
displayed submenu.
D
Click [OK] when you see a dialog box.
E
Click the [ ] button at the top right corner to exit the
NVR Viewer.
BThe viewer will display in the selected language
during the next startup.
Description
[ ] Button
[K] Button
Advertisement
Table of Contents
