JVC KD-AVX77 Instructions Manual page 39

• For MPEG1/MPEG2IJPEG/MP3IWMAIWAV/AAC, track
is searched within the same folder.
• For DVD-VR, program/playlist search is possible
during Original program playback (PG)/Playlist
playback (Pl).
• To erase amisentry, press ClR (clear) while holding
SHIFT.
Using menu driven features
• DVDVideo
rn
Press TOP M/MENU to enter the menu screen.
rn
Press L:::../v/
<J/r:>
to select an item you want to
start play.
W
Press ENT (enter) to confirm.
• DVD·VR
rn
Press TOP Mto enter the Original Program.
Press MENU to enter the Playlist.
rn
Press L:::../v/
<J/r:>
to select an item you want to
start play.
W
Press ENT (enter) to confirm.
• Original Program/Playlist screen,
~
58.
• yeD
rn
While holding SHIFT, press DIRECT to enter the
search mode.
rn
While holding SHIFT, press the number buttons (0
- 9)
to enter the desired number.
W
Press ENT (enter) to confirm.
• To return to the previous screen, press RETURN.
Canceling the PBC playback
~
rn
Press.,
then press DIRECT while holding SHIFT.
rn
While holding SHIFT, press the number buttons
(0 - 9)
to enter the desired number.
W
Press ENT (enter) to confirm.
• To resume PBC, press TOP M/MENU.
• Operations using the
on-screen bar
(DYD-Yideo/DVD-VRIMPEG l/M PEG2IJ PEG/
YeD)
These operations are possible on the monitor using the
remote controller.
1
Show the
on-screen bar.
(~40)
(twice)
• The on-screen bar is not displayed fully under
some
<Aspect>
settings. (
~
15)
2
Select an item.
lit
3
Make aselection.
If pop-up menu appears...
• To cancel pop-up menu, press RETURN.
• For entering time/numbers, see the following.
Entering time/numbers
Press L:::../v to change the number, then press
<J/r:>
to
move to the next entry.
• Each time you press L:::../v, the number increases/
decreases by one value.
• After entering the numbers, press ENT (enter).
• It is not reqUired to enter the zero and tailing zeros
(the last two digits in the example below).
Ex.: Time search
DVD: _:__:__ (Ex.: 1:02:00)
Press L: : : . . once, then r:> twice to go to the third entry, L: : : . .
twice, then press ENT (enter).
Removing the on-screen bar
OPERATIONS
39