Hitachi CP-TW2503 User Manual page 96

Presentation tools
Interactive Function (continued)
7. Projector Operation (Continued)
Saves the image on the projector screen, along with any text or pictures
drawn, onto a USB memory device connected to the projector.
• Files are saved with the file name "Pxxx.bmp" (where xxx is a
consecutive number) into a folder named "PJ_Capture" . If it does not
already exist, a "PJ_Capture" folder is created automatically.
• Before removing a USB memory device with files saved to it from the
projector, be sure to run the projector' s "REMOVE USB" function. The
time stamp of saved files are as per the date and time settings of the
projector. If you do not run the "REMOVE USB" function and remove the
USB memory device, the time stamp may not be recorded correctly.
• The tool bar is not saved.
• Copyright protected images cannot be saved.
• Nothing drawn using this function is saved to the projector' s "MyScreen".
Temporarily blanks out the display.
Touching anywhere in the screen recovers the display.
• It can be used in the same way as the AV MUTE button on the projector'
s remote control.
Turns off the projector. Touch the icon for three seconds or so.
• If you turn the projector off while using the drawing function, any unsaved
drawings will be lost.
Toggles between display/hide the Pattern (grid lines).
Cycles through the display source signals.
• It can be used in the same way as the
control panel. However, images cannot be selected from a LAN port or a
USB TYPE B port.
Use the icon to adjust the volume.
The projector will go into the FREEZE mode, which the picture is frozen.
To exit the FREEZE mode and restore the screen to normal, press the
icon.
96
button on the projector's