Hitachi CP-TW2503 User Manual page 100

Presentation tools
Interactive Function (continued)
Basic pen operation
You can perform the following mouse operations using the button at the tip of the
pen.
• Click
Press the tip of the pen against the screen surface with moderate force, and lift it
quickly.
• Double-click
Perform the "click" operation twice quickly by pressing the tip of the pen against
the screen surface with moderate force and lifting it.
Long press of Pen operates the same as clicking the right mouse button.
• Drag
Press the tip of the pen against the screen surface with moderate force, and
move the pen without lifting it.
Driver Installation
Switches to WITH PC mode by pressing the IWB button on the remote control.
DVD drive is recognized by connecting USB TYPE B of the projector and USB TYPE
A of the PC with a USB cable.
・ For Windows PC
When connecting the projector and your computer with IWB MODE set to WITH
PC and the driver for using the Interactive Function is not installed on your
computer, the dialog for installing driver is displayed on a display of the computer.
・ For Mac PC, it can be installed from "UP_HM\osx\U-Pointer_HM\U-Pointer
Setup.pkg" in DVD drive.
CAUTION
the computer until the driver is installed. Otherwise, installation may fail.
Do not operate the projector by remote control, etc. until the driver is installed.
Otherwise, installation may fail.
NOTE
• Projector and PC are necessary to be powered on to install the driver.
WITH PC mode is necessary to be set in IWB MODE. Do not operate the
projector until the driver is installed. Otherwise, installation may fail.
100
►Do not pull out the USB cable connecting the projector and