JVC LST0886-001A Instructions Manual page 71

A
Preset Position
Position
Title
B
Pan /Tilt /Zoom
C
Speed
For setting the preset positions.
For selecting a APositionB.
[Set values :HOME , 1 to 19]
Displays the current title.
Enter accordingly if you want to register or change a title.
(You can enter up to 32 alphanumeric or 16 Japanese characters. AJPEG
ViewerB displays up to only 16 alphanumeric or 8 Japanese characters.
Press [Register] button to complete position registration.
Memo:
● Click the [Unregister] button to delete the selected position information.
However, [HOME] cannot be deleted.
● The display area of Home position is set to the full screen by default.
Pan/Tilt operation
Click the arrow buttons to move the display area in the direction indicated
by the arrow. Release the button to stop moving the area.
Click the AHB button to move to the home position.
Zoom operation
Use this function to perform digital zoom on the display area.
[ + ] : Zooms toward the tele end, and display of the object is enlarged.
[ - ] : Zooms toward the wide end, and display of the object becomes
smaller.
Ratio to Full Area
Shows current ratio to full area.
Memo:
● You can restrict the magnification of the object using the [+] button by
altering the [Zoom Limit] settings. (A Page 38)
For configuring the operation speed settings.
Pan/Tilt : For configuring the operation speed settings of the Pan/Tilt control
button. The larger the value, the higher the operation speed.
[Set values: 1 to 8]
Zoom : For configuring the operation speed settings of the Zoom control
button. The larger the value, the higher the operation speed.
[Set values: 1 to 4]
71