Table of Contents
Advertisement
Note: You can also connect a cassette adapter or
an audio cord (both not supplied) to the AUDIO
jack to send the signals to your car stereo.
An optional hard-wired FM transmitter—FM
Switching Box Assembly (Parts No. 112C3159) is
available. By connecting this Assembly between
the FM OUT terminal of the cradle and the
antenna input terminal of your car stereo, you can
obtain stable and reliable transmission/reception.
• If your JVC PnP has been properly connected
and the antenna is receiving the SIRIUS signal,
you will hear audio.
• If your JVC PnP has not been properly
connected, "Antenna Error" will appear on the
display of your JVC PnP.
Check the connections and the antenna location.
– Make sure your car is not in a garage, or
somewhere the satellite signal could be
blocked.
Running the Antenna Cable
Before routing the antenna cable, confirm that the
antenna is mounted in a good location.
1
Press the
(POWER) button to turn off your
JVC PnP.
2
Slide the locking knob
into the unlock position.
3
Remove your JVC PnP from the cradle.
4
Unplug the cigarette lighter adapter from the
cigarette lighter and the antenna from the
cradle.
Continued on the next page...
9
Advertisement
Table of Contents
