Before Starting - JVC AV-P720U Instructions Manual

BEFORE STARTING

1.
Pull up the camera arm slightly towards the direction of
while pressing the camera arm lock release button
lease the lock release button; then pull up the camera arm
until the locking system engages completely.
Note:
• Do not let go of the camera arm while the lock re-
lease button is depressed. The camera arm section
will drop down of its own weight and this could result
in breakdown and/or injury.
• When pulling up the camera arm, make sure to pull
it up by holding the arm section. If you try to pull up
by holding either the camera section or the lighting
section, it may cause breakdown.
2.
Rotate the camera head towards the direction of
you hear a click and then let the lens section face towards
the stage which is located directly below.
3.
Carry out one or the other of the following connections de-
pending on the type of a TV monitor image input terminal in
use.
*We recommend the use of a S-image output because it
can reduce bleeding at color borders.
Note:
• Signals that entered the VIDEO INPUT terminal can
only come out of the VIDEO OUTPUT terminal. If
you would like to use the VIDEO INPUT terminal
make sure to connect the signals to the VIDEO OUT-
PUT terminal.
● Connecting to the apparatus equipped with a com-
posite video (C-video) input terminal
Video connection cable provided
To VIDEO OUT
terminal of AV-P720
OUT
VIDEO
4.
Connect the power cord connector to the AC IN connector
and plug the other end into an AC outlet. Press the power
switch to turn the power on.
Note:
• In order to protect this equipment and also other con-
nected devices, make sure to turn off the power switch
whenever you carry out connections.
6
2
1
. Re-
3
until
To Video input
terminal
TV Monitor
1
Stage
● Connecting to the apparatus equipped with a S-image
(S-video) input terminal
S-Video connection cable (optional)
To CAMERA OUT
terminal of AV-P720
OUT
CAMERA
2
3
To S-Video input
terminal
TV Monitor