Rear Operation Panel; Back Panel - JVC AV-P720U Instructions Manual

Rear Operation Panel

AUTO WHITE
SET
1
1
AUTO WHITE SET button
2
IRIS button
3
ON SCREEN ADJUSTMENT button
4
LIGHTING button

Back Panel

OUT
CAMERA
1 2
1
CAMERA OUTPUT terminal
2
VIDEO OUTPUT terminal
3
VIDEO INPUT terminal
4
REMOTE INPUT terminal
5
AC IN connector
ON-SCREEN ADJUSTMENT
IRIS
2
: selects the AUTO WHITE BALANCE ADJUSTMENT mode. (P10)
: adjusts brightness of the material presented on the monitor screen. (P10)
: operates the ON SCREEN ADJUSTMENT function. (P11)
: turns LIGHTING on/off. (P10)
IN
REMOTE IN COMMERCIAL USE ONLY
(RS-232C)
VIDEO VIDEO
3 4
: outputs camera image signals from the body regardless of setting of the INPUT SELECT
button.
: outputs image signals that have been selected by the INPUT SELECT button.
: is an input terminal for image signals from the external equipment. The signals that enter
this terminal when 'VIDEO' was selected on the INPUT SELECT button will go out via the
VIDEO OUTPUT terminal.
: is a RS-232C terminal that allows external functions, for instance by a PC, to control the
operations. Information on communication protocols and commands is available separately.
For details, consult your JVC dealer.
: connects the power cord. Please only use the power cord supplied.
MENU/ENTER
3
AC 100V – 120V
50Hz/60Hz 17W
5
LIGHTING
4
5