Connector; Monitors; Introduction - Mitsubishi Electric LS Pro Hardware Technical Reference

Note
If the PSU is dismantled it must be subjected to the following electrical safety tests before being
returned to service:
1. Earth bond continuity
2. Insulation resistance
3. Dielectric strength
4. Earth leakage

Connector

The voltage output cable is terminated in a ten way plug. The pinout and connector
details are given below.
Pin
1
2
3
4
5
6
7
8
9
10
4.2

MONITORS

Introduction

Apricot supplies 14" colour SVGA, and 14" and 17" colour EVGA monitors. All Apricot
SVGA and EVGA monitors described here are low emission monitors which are
compliant with the MPR2 radiation legislation.
These monitors are fully compatible with the adapter on the system board and may be
used in any standard VGA display mode. Standard VGA display modes include:
640 pixel x 480 line (VGA mode)
640 pixel x 400 line (CGA double line mode)
640 pixel x 350 line (EGA mode)
720 pixel x 350 line (MDA mode)
In all the modes given above the monitors display 80 columns x 25 rows of characters,
but the character cell size varies from mode to mode as follows:
8 x 19 (VGA mode)
9 x 16 (VGA mode)
8 x 14 (EGA mode)
8 x 16 (CGA double line mode)
9 x 14 (MDA mode)
Peripheral items
Function
+12V
+12V
+5V
+5V
0V
0V
0V
0V
-12V
Power good
LS PRO HARDWARE TECHNICAL REFERENCE 4/3
6
10
1
5