Strobe Print - JVC GV-PT1 Instructions Manual

24

Strobe Print

The printer stores a selected number of images at short intervals, and prints them on one sheet.
MENU Button
POWER
Button
POWER
ON Lamp
Print Lamp
Print Sheet Insertion Slot
Preparation
Connect the image source (camcorder, video cassette recorder) to the printer (
Install the ink sheet cartridge in the printer (
Plug in the printer and press POWER. The power comes on and the POWER ON Lamp lights.
2
PRINT MENU
PIX STABILIZER
MULTI PIX
CONTENT : SELECTED PIX
TO SELECT PUSH ( SELECT )
TO SET
PRINT MENU
PIX STABILIZER
MULTI PIX
CONTENT : STROBE PIX
TO SELECT PUSH ( SELECT )
TO SET
STROBE SPEED
ID NUMBER
LANGUAGE : ENGLISH
TO SELECT PUSH ( SELECT )
TO SET
SELECT Button
Print Sheet Exit Slot
1 / 2
: OFF
: 4
PUSH ( + , – )
1 / 2
: OFF
: 16
PUSH ( + , – )
2 / 2
: HIGH
: 20
PUSH ( + , – )
ADVANCED PRINTING (cont.)
SET Buttons
PICTURE
SELECT
Button
MEMORY
Button
pg. 10).
1
ACCESS PRINT MENU
Press MENU. The Print Menu appears.
2
SET PARAMETERS
Set "MULTI PIX" to "4" or "16". Then set
"CONTENT" to "STROBE PIX", and set
"STROBE SPEED" to either "HIGH" or "LOW".
3
CLOSE PRINT MENU
Press MENU. The Print Menu disappears, and
selection is complete.
4
BEGIN SOURCE PLAYBACK
Fast-forward or rewind the source tape to
locate the desired scene, then start playback a
little before the scene.
pg. 12).