JVC 0298MNV*SW*VP Instructions Manual page 20

q Procedure from Picture Data Transmission to Printing
The picture data sent from the digital still camera is automatically printed. The PRINT lamp
lights and blinks as indicated below until printing is finished.
IrDA DV
Blinking slowly
IrDA DV
Lighting
IrDA DV
Lighting
IrDA DV
Lighting
PRINT
ON LINE
PRINT
ON LINE
Blinking
PRINT
ON LINE
Blinking slowly
PRINT
ON LINE
Lighting
PICTURE DATA BEING TRANSMITTED
1
FROM CAMERA TO PRINTER
PRINTER CONVERTING THE PICTURE
2
DATA AFTER TRANSMISSION
• This may take several minutes depending on
the machines in use or the volume of data
transmission.
DATA CONVERSION FINISHED
3
• Printing automatically starts with the paper
tray loaded.
PRINTING FINISHED
4
• The picture data is being stored in memory as
long as the PRINT lamp is lit. Every pressing
of the PRINT button produces a print copy of
the same picture.
• When you want to print another picture,
repeat the steps 2 and 3 on the previous page.
• Data communications may be variable or
impossible depending on the lighting
condition, battery consumption,
communications distance and sending and
receiving angles.
19
EN