Disassembly And Assembly - Epson LQ-300 + Service Manual

EPSON LQ-300+

4.2 Disassembly and Assembly

This section explains the disassembly and assembly of Product Name. Unless
otherwise specified, assembly can be done in the reverse order of the disassembly
procedure.
Anything that service person should pay attention to is described under "Check Point".
Any adjustment required after assembly is described under "Adjustment".
When you have to remove parts that are not described in this chapter, refer to the
exploded diagram on Appendix of this manual.
Read 4.1.1 "Precautions" before start disassembling the printer.
C A U T I O N
Remove ink ribbon and paper before disassembling the printer.
Disassembly and Assembly
The figure below is the disassembly flowchart for main component.
4.2.2 "Upper Housing
4.2.3 "Printer
Mechanism Removal"
4.2.5 "C395 MAIN
Board Assembly
Flowchart 4-1. Disassembly Flowchart (Main Component)
Disassembly and Assembly
START
4.2.1 "Printhead
Removal"
Removal"
4.2.4 "Board Assembly
and Panel Removal"
4.2.6 "C294PSB/PSE
Board Assembly
Revision C
56