4.2
System Programming
[614] Internal Pulse Detection
Enables or disables connecting a single line telephone (SLT) to receive pulse signals for each
extension.
6
* Extension jack number: 01 through 24 /
Default
• If you select "MODE 1" in program [207] "Hookswitch Flash Timing Range Selection"
!
!
and "Enable" in this program, the system will distinguish between a pulse signal and
hooking depending on the situation. When you select "Disable" in this program, if "1" is
dialed during the pulse mode, the system will regard it as hooking and all other numbers
will be disregarded.
• Feature Reference
Section 3, Features
Hookswitch Flash
1
4
NEXT
All extension jacks – Enable
or
NEXT
extension jack no.*
(01···24/
)
SELECT
(All extension jacks)
PREV
To continue
STORE
SELECT
(Enable/
Disable)
To continue
System Programming
[614]
END
4-77