Status4 Menu; Sat Field; Freq Field; Symb Field - Motorola DSR-6100 Operator's Manual

Status4 Menu

This menu does not appear if the Input field (described on page 25) is set to ASI In
or GigE In. Press the  buttons until the STATUS4 menu appears. This screen
displays the satellite name and signal tuning characteristics.

Sat Field

This status-only field displays the satellite name from the downloaded network
information. Dashes (---) are displayed when no information is available.

Freq Field

This status-only field displays the downlink frequency of the L-band signal. This may
be different from the frequency that was initially set in the Manual Tune menu.

Symb Field

This status-only field displays the symbol rate (megasymbols per second) of the L-
band signal. Dashes (---) indicate that no information is available.

Code Field

This status-only field displays the code rate (Error Control Coding for Forward
Error Correction) of the L-band signal.

Format Field

This status-only field displays the format of the L-band signal. The field displays
either Comb (Combined) or Split. Dashes (---) are displayed when no information
is available.

Status5 Menu

This menu does not appear if the Input field (described on page 25) is set to ASI In
or GigE In. Press the  buttons until the STATUS5 menu appears. This screen
displays the sync, Eb/No, and authorization state of the DSR-6100.
DSR-6100
57